ASTM A179 Cold-Drawn Heat-Exchanger and Condenser Carbon Steel Seamless Round Pipe

Description
Pipe Customization
Inventory Display
About HYT

ASTM A179 Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn.

Jiangsu HYT stocks a full range of ASTM A179 pipe in:

ASTM A179 (ASME SA179) Seamless Carbon Cold Drawn Steel Tubes
Applications: For Heat exchanger, condensers tubes, heat transfer thermal equipment
Outer Diameter (OD): Ranges from 1/8 inch (3.2 mm) to 3 inches (76.2 mm).

Limitations on Diameter and Thickness: While this standard also applies to diameters and thicknesses outside the specified sizes, mechanical properties are not applicable for:

Diameters smaller than 1/8 inch (3.2 mm)

Thicknesses less than 0.015 inches (0.4 mm).

Scope of ASTM A179 Seamless Carbon Cold Drawn Steel Tubes

ASTM A179 (SA 179) standard specification covers seamless cold drawn low-carbon steel pipe, for tubular heat exchanger, condensers, and other similar heat transfer equipment.

The ASTM A179 tube covers the OD from 1/8” to 3”, which is 3.2m m to 76.2 mm. Other diameters and thicknesses smaller than the specified sizes also apply to this standard, but mechanical properties are not applicable for the size smaller than 1/8” and 3.2 mm, or thicknesses smaller than 0.015 inches 0.4 mm.

Physical Property and Mechanical Property of ASTM A179

Property	Value
Minimum Yield Strength	32,000 psi (≈ 220 MPa)
Tensile Strength	47,000 psi (≈ 325 MPa)
Elongation (Minimum)	Minimum 35%
Density	7.85 g/cm³ (≈ 0.284 lb/in^3)
Thermal Conductivity	52.7 W/m·K (at 20°C / 68°F)
Specific Heat Capacity	450 J/kg·K

ASTM A179 Seamless Cold-Drawn Steel Tube Advantage

Efficient Heat Transfer: Due to its seamless structure and low carbon steel material, this tube offers effective heat transfer capabilities.

Good Cold Working Property: Thanks to the cold drawing process, these tubes have superior mechanical strength and excellent surface quality.

Corrosion Resistance: A179 steel tubes exhibit decent resistance to oxidation and certain chemicals.

Cost-effective: When compared to other advanced metals and alloys, low carbon steel offers a cost-effective material choice, especially in large-scale applications.

Weldability: The low carbon content of A179 steel tubes ensures their excellent weldability, making them easier to install and maintain.

Broad Applications: Due to their superior characteristics, these tubes are widely used in various industrial equipment, such as heat exchangers, condensers, boilers, etc.

Standardization: ASTM A179 provides clear production and testing standards, ensuring consistent quality and performance across all products manufactured by different producers.

High Reliability and Durability: When properly installed and maintained, these tubes can operate reliably for extended periods.

Product Specification of ASTM A179 Carbon Steel Pipe

Jiangsu HYT stocks a full range of ASTM A179 pipe in:

Limitations on Diameter and Thickness: While this standard also applies to diameters and thicknesses outside the specified sizes, mechanical properties are not applicable for:

Diameters smaller than 1/8 inch (3.2 mm)

Thicknesses less than 0.015 inches (0.4 mm).

Contact Jiangsu HYT for ASTM A179 Carbon Steel Pipe and Tube Today

Our extensive inventory at HYT covers A179 in multiple different forms and all grades. To find out more about how we can assist with your specific application, please contact us to receive a custom quote and to learn more about our shipping and pick-up options.

Welcome to HYT, your reliable industry partner. Since its inception, HYT has been a leader in the field of steel pipe manufacturing, dedicated to providing highly customized steel pipe solutions to key industries worldwide including construction, automotive, and petrochemical sectors. Our success is built on a relentless pursuit of innovation and strict quality control.

Customization Guideline

Diverse Material Types
Diverse Pipe Section Shape
Diverse Technique
Diverse Pipe End Type

Available Choice in Steel Pipe Material
HYT offers a diverse range of steel pipe materials to accommodate the practical engineering and product applications across various industries. Our selection includes stainless steel pipes, carbon steel pipes, alloy steel pipes, nickel alloy pipes, copper alloy pipes, and titanium alloy pipes. Read the content below to discover the specific grades of steel pipe materials HYT can provide.

Stainless Steel Pipe Common Standards
ASTM A312, ASTM A213, ASTM A269, ASTM A358, ASME SA312, JIS G3459, JIS G3463, JIS G3448, JIS G3456, JIS G3446, DIN 17456, DIN 17458, EN 10216-5, EN 10217-7, DIN 11850, EN 10296-2, EN 1127, EN 10253-4, EN 10217-7, EN 10216-5, GB/T 14975, GB/T 14976, GB/T 12771, GB 24512.2, GB/T 21832
Stainless Steel Pipe Common Grades
304, 316, 310S, 317L, 321, SUS304, SUS316, SUS310S, SUS317L, SUS321, 1.4301, 1.4401, 1.4845, 1.4438, 1.4541, X5CrNi18-10, X5CrNiMo17-12-2, X8CrNi25-21, X2CrNiMo18-15-4, X6CrNiTi18-10, 06Cr19Ni10, 06Cr17Ni12Mo2, 0Cr25Ni20, 022Cr19Ni13Mo3, 06Cr18Ni11Ti

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Carbon Steel Pipe Common Standards
ASTM A106, ASTM A53, ASTM A179, ASTM A192, ASME SA106, JIS G3454, JIS G3452, JIS G3444, JIS G3461, JIS G3456, DIN 2440, DIN 2448, EN 10255, EN 10217, EN 10216, EN 10216-1, EN 10217-1, EN 10224, EN 10025, EN 10210, GB/T 8163, GB/T 8162, GB/T 3087, GB/T 5310, GB/T 6479
Carbon Steel Pipe Common Grades
A106 Grade B, A53 Grade B, A333 Grade 6, A335 P11, A500 Grade C, STPG 370, STPG 410, STK400, STKM12B, SGP, St37, St52, S235JR, S355J2H, E235, S275JOH, S355JOH, S235JRH, S275J2H, S355K2H, Q235, Q345B, 20#, 45#, 16Mn

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Alloy Steel Pipe Common Standards
ASTM A335, ASTM A213, ASTM A691, ASME SA335, ASME SA213, JIS G3458, JIS G3462, JIS G3467, JIS G3441, JIS G3455, DIN 17175, EN 10216-2, EN 10297-1, EN 10083-3, DIN 17204, EN 10216-2, EN 10297-1, EN 10305-1, EN 10210-1, EN 10253-2, GB/T 3077, GB/T 8162, GB/T 5310, GB/T 9948, GB/T 6479
Alloy Steel Pipe Common Grades
P11, P22, P5, P91, P9, SCM415, SCM435, SCM440, STPA12, STPA22, 13CrMo44, 10CrMo910, X10CrMoVNb9-1, 25CrMo4, 42CrMo4, 16Mo3, 13CrMo4-5, 10CrMo9-10, X11CrMo5, X10CrMoVNb9-1, 12Cr1MoV, 15CrMo, 35CrMo, 42CrMo, 12Cr2Mo

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Nickel Alloy Pipe Common Standards
ASTM B163, ASTM B165, ASTM B167, ASTM B444, ASME SB622, JIS H4551, JIS H4552, JIS H4553, JIS H4600, JIS G4902, DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17754, EN 10216-5, EN 10217-7, EN 10250-4, EN 10272, EN 10095, GB/T 15007, GB/T 2882, GB/T 3625, GB/T 3624, GB/T 2054
Nickel Alloy Pipe Common Grades
Alloy 200 (UNS N02200), Alloy 400 (Monel 400, UNS N04400), Alloy 600 (Inconel 600, UNS N06600), Alloy 625 (Inconel 625, UNS N06625), Alloy 825 (Incoloy 825, UNS N08825), NW2200 (Ni 99.2), NW4400 (Monel 400), NW6600 (Inconel 600), NW6625 (Inconel 625), NW8825 (Incoloy 825), NiMo16Cr15W (Hastelloy C-276, 2.4819), NiCr15Fe (Inconel 600, 2.4816), NiCr22Mo9Nb (Inconel 625, 2.4856), NiCu30Fe (Monel 400, 2.4360), NiCr21Mo (Alloy 825, 2.4858), NS111 (Alloy 200), NS334 (Hastelloy C-276), NS312 (Alloy 600), NS336 (Inconel 625), NS321 (Incoloy 825).

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Copper Alloy Pipe Common Standards
ASTM B111, ASTM B280, ASTM B75, ASTM B88, ASTM B251, JIS H3300, JIS H3250, JIS H3320, JIS H3560, DIN 17664, DIN 17671, DIN 17660, DIN EN 12449, DIN EN 12451, EN 12449, EN 12451, EN 1057, EN 13600, EN 13348, GB/T 4423, GB/T 5231, GB/T 18033, GB/T 8890, GB/T 1527
Copper Alloy Pipe Common Grades
C12200, C11000, C70600, C71500, C23000, C1220, C1100, C7060, C7150, C6870, Cu-DHP, Cu-ETP, CuNi10Fe1Mn, CuNi30Mn1Fe, CuZn37, Cu-DHP (CW024A), Cu-ETP (CW004A), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H), CuZn30 (CW505L), H59, H62, T2, QSn4-3, QAl9-4

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Titanium Alloy Pipe Common Standards
ASTM B861, ASTM B862, ASTM B337, ASTM B338, ASME SB338, JIS H4600, JIS H4631, JIS H4632, JIS H4635, JIS H4670, DIN 17861, DIN 17869, DIN 17850, DIN 17851, DIN 17864, EN 10216-5, EN 17851, EN 17860, EN 17861, EN 17862, GB/T 3625, GB/T 3624, GB/T 13810, GB/T 2965, GB/T 9
Titanium Alloy Pipe Common Grades
Grade 2, Grade 5 (Ti-6Al-4V), Grade 9 (Ti-3Al-2.5V), Grade 7, Grade 12, Class 1 (Pure Titanium), Class 60 (Ti-6Al-4V), Class 12 (Ti-0.3Mo-0.8Ni), Class 2 (Pure Titanium), Class 61 (Ti-6Al-4V ELI), 3.7035 (Grade 2), 3.7165 (Ti-6Al-4V), 3.7195 (Ti-3Al-2.5V), 3.7235 (Grade 7), 3.7105 (Grade 12), Grade 2, Ti6Al4V (Grade 5), Ti3Al2.5V (Grade 9), Ti0.2Pd (Grade 7), Ti0.3Mo0.8Ni (Grade 12), TA1 (Pure Titanium), TC4 (Ti-6Al-4V), TA10 (Ti-0.3Mo-0.8Ni), TA2 (Pure Titanium), TC4ELI (Ti-6Al-4V ELI)

If you are in demand of steel pipe made of stainless steel, please feel free to contact HYT representatives to get newest stock information and quote.

Available Shape Choice of Carbon Steel Pipe

HYT offers an unmatched range of custom carbon steel tubing options to meet the diverse needs of your projects. Our product lineup includes tubing in various shapes such as round, square, rectangular, triangular, hexagonal, octagonal, and oval, catering to a wide array of applications across different industries.

Product Display of Diverse Section Shape

Round Pipe

If you are in demand of steel pipe in this shape, please feel free to contact HYT representatives to get newest stock information and quote.

Square and Rectangular Tube

If you are in demand of steel pipe in this shape, please feel free to contact HYT representatives to get newest stock information and quote.

Oval Pipe

If you are in demand of steel pipe in this shape, please feel free to contact HYT representatives to get newest stock information and quote.

Hexagonal Pipe

If you are in demand of steel pipe in this shape, please feel free to contact HYT representatives to get newest stock information and quote.

Octagonal Pipe

If you are in demand of steel pipe in this shape, please feel free to contact HYT representatives to get newest stock information and quote.

Available Technique of Steel Pipe

HYT specializes in two primary steel pipe manufacturing techniques: seamless and welded. Each method offers unique manufacturing processes and applications, ensuring we can meet the diverse needs of various industries.

Seamless Steel Pipes

Seamless steel pipes are manufactured through processes such as hot rolling, cold rolling, or cold drawing. These methods start with a solid steel billet, heated and formed under high temperature and pressure to create a tube without any welded seams. The main advantages of seamless pipes lie in their uniformity and strength, making them ideal for high-pressure, high-temperature environments, or other demanding conditions. Due to their seamless nature, these pipes exhibit higher integrity and resistance to cracking under internal and external pressures.

Welded Steel Pipes

In contrast to seamless pipes, welded steel pipes are produced through methods like Electric Resistance Welding (ERW), Submerged Arc Welding (SSAW), or Longitudinal Submerged Arc Welding (LSAW). These processes involve curling steel sheets or coils into a tubular shape and welding them at the seam. The advantages of welded pipes include cost-effectiveness and the ability to manufacture large diameters and thick-walled pipes, crucial for many structural and transportation applications.

Electric Resistance Welding (ERW) Manufacturing Process

Submerged Arc Welding (SSAW) Manufacturing Process

Longitudinal Submerged Arc Welding (LSAW) Manufacturing Process

Whether opting for the robustness and tightness of seamless steel pipes or the economical and adaptable features of welded steel pipes, HYT provides high-quality solutions tailored to your specific requirements. Our expertise in technology and manufacturing ensures you receive the best product performance and enduring reliability.

Pipe End Processing
At HYT, we offer comprehensive end processing services for steel pipes to cater to diverse industrial applications. Our customized processing options include:
Plain End: This finish provides a clean and smooth end cut, ideal for applications requiring welding or other types of connections. Plain end pipes are suitable for various fluid transmission systems, ensuring seamless integration into pipelines.
Bevelled End: Bevelled ends are prepared to facilitate easier welding, especially in extensive pipeline setups. The angle of the bevel can be customized according to specific client requirements to optimize welding strength and quality.
Threaded End: Threaded end processing allows for steel pipes to be connected via threads, eliminating the need for welding. This connection method is easy to install and maintain. We offer a variety of thread specifications to match different interfaces and pressure requirements, making it a quick and reliable choice during installation.

LARGE AMOUNT OF STEEL PIPES IN STOCK

For pipe sizes and grades not found in the section above, please contact HYT at mail: [email protected] with your inquiry.

HYT – YOUR TRUSTED METAL PRODUCT SOURCE

HYT Metal is a professional manufacturer and source factory engaged in the research, development, production, and service of various metal products such as sheet, pipe, bar ,coil, strip, fitting made of stainless steel, carbon steel, alloy steel ,nickel alloy, copper alloy ,titanium alloy, etc. Our factory is equipped with multiple advanced cold drawing and cold rolling production lines, reflecting over 15 years of rich experience in both the domestic and international markets. Whether you require any metal products, HYT is committed to delivering products that excel in strength, durability, and performance, ensuring satisfaction in every aspect of our service.

HYT CERTIFICATIONS

At HYT, every product we offer is a pledge to excellence. Our manufacturing processes are governed by a stringent quality management system, certified under ISO 9001:2015, ensuring consistent and superior product quality.
Moreover, our products are CE certified, compliant with European safety standards, and UL certified to meet the rigorous requirements of both the United States and Canada.

HYT - Your Trusted Metal Product Source

HYT Metal stands as a fully-owned subsidiary of Wuxi Lusheng Special Steel Co., Ltd. Our foundation is built on a strong commitment to extending our reach beyond domestic borders, focusing on international sales and market exploration for a vast array of steel product. We are metal experts and have been providing quality customer service and products since 2015.

At HYT, we supply a wide range of metals for a variety of applications. Our stock includes: carbon steel, stainless steel, aluminum, tool steel, alloy steel, nickel alloy, brass, bronze, copper and titanium alloy.

We stock a wide range of shapes including: bars, tubes, sheets, plates and more. And we can cut metal to your exact specifications.

Contact us for more information regarding premium metal product at +86-18921111366 or [email protected] and we will gladly discuss the specific requirements of your next project.

HYT is your premium resource for various metal product.